MONTREAL · QUEBEC
Three-coat drywall joint finishing in Montreal — tape, fill, finish and sand to a paint-ready surface. Level 4 standard, Level 5 skim coat available for critical-lighting walls.
JOB SITE · MONTREAL
Joint finishing in Montreal
A wall is only as good as its joints. Three coats of compound, sanded between each pass, with the final pass inspected under raking light — that's what separates a finish that disappears under paint from one that telegraphs every seam. We take joint finishing seriously because we know that's what your eye lands on the moment the lights come up.
Homeowners renovating condos and houses. Designers delivering custom interiors. General contractors who need reliable finishing crews. Developers turning over new units. We adapt to each context but never to the standard of work.
OUR PROCESS
ÉTAPE 01
Verify drywall installation, choose finish level.
ÉTAPE 02
Floors, fixtures and adjacent finishes covered.
ÉTAPE 03
Tape and fill all joints, fastener heads, inside corners.
ÉTAPE 04
Successive coats, light sanding in between.
ÉTAPE 05
Fine sand with HEPA vacuum extraction.
ÉTAPE 06
Final QA pass, surfaces ready for primer.
FREQUENTLY ASKED QUESTIONS
RELATED SERVICES
ZONES DESSERVIES
Construction N. Rodriguez Ltée intervient sur tout le Grand Montréal, la Rive-Nord et la Rive-Sud — résidentiel, commercial et chantiers de rénovation.
Vous n'êtes pas dans la liste ? Contactez-nous — nous évaluons chaque projet.
YOUR PROJECT IN MONTREAL